| If you have a worn/damaged crankshaft, bring it in to us to be inspected. While the majority of cranks only require a typical undersize grind which is done on our Prince Crankshaft Grinder, others may need to be straightened, or simply chamfered and polished.
We also supply Big End and Main Bearings in standard and undersize. |
Prince Crankshaft Grinder |
| Our CEMB balancing machine is used to perform the rotating side of balancing, such as crankshaft, flywheel, pressure plate, harmonic balancer and pulleys. Our machine is capable of taking a shaft up to 3.5Mtrs long. |
CEMB Balancing machine |
| The CRG-9200 first grinds a reference surface square to the parting face of the main bearing cap. The parting face is then ground from this square, accurate reference surface. The original relationship between parting face and bore wall is maintained. Grinding the parting surface of the main bearing caps leaves all the main bearing bores "undersize" when caps are bolted back in place. The main bearing bores are then line honed. |
CRG-9200 |
About us
Overhaul
